TRU-POWER Home

Tired of turning on and off your older non -remote turn on power amps ?
This is the solution , this will remote turn on and off the amps for you either by the newer home theater 12 volt triggers or by 110 switched low current.
Most receivers and pre-amps can only switch 100watts at A/C out
terminals , which is not enough for power amps but enough for accessories .
Many home theater processor have only 12 Volt DC out at only a few hundred milliamps of power so this is needed to switch them on and off .
These will all switch 25 amps of current . In the case of home theater can leave off center amp while listening to music or just front amp on when listening to stereo source , when program remote triggers from processor .
There will be 2 grades one for accessories and small to mid power amps and one using mil spec wire and hospital grade plugs and receptacles .This a tried and proven design that I have used in my own system for nearly 20 years and makes using multi-amp systems easy .
The high grade version can be ordered with nearly any length of wire .
Custom crafted for each individual needs ,
E-mail me conditions of use .
This will work with most amps including Hafler , NAD , Marantz and any other with simple A/C switch .
These are American made using American high grade parts .
These are simple switches , no snake oil and no smoke and mirrors , just
well made up of excellent components .
These are not line conditioners , there is nothing in the path of A/C to
reduce Voltage or degrade in any way .

CLICK FOR BIGGER PICTURE $150
TP-1 DC
12 Volt DC trigger , 3.5mm
(1/8 ")
Use this one to remote trigger up to six small - mid power amps and accessories . Capable of switching 25 Amps , available in 12 Volt DC or 110 Volt A/C trigger .
CLICK FOR BIGGER PICTURE $300
TP-2 AC
110 Volt A/C trigger .
Zero loss switching for the biggest of amps .
Hospital grade plug and receptacles , MilSpec 12 Gauge
silver plated copper Teflon insulated wire .
Capable of switching 2 - 25A circuits , available in 12 Volt DC or 110 Volt A/C trigger .

email: bngserv@shaw.ca